Rotary encoder performance test platform
The performance testing device of cabr-jdbm-v1.0 rotary encoder is a set of test equipment for the performance parameter test of encoder, environment disturbance stability test, dynamic response test and life test.
I. Main functions
1. The performance parameters of the test: automatic analysis encoder pulse waveform data form, it is concluded that phase difference, the number of pulses, the peak voltage, phase precision and speed of response (namely can response maximum speed), and other performance parameters.
2. Environmental disturbance stability test: automatic analysis encoder in applying interference environment of constant speed or speed rotation encoder pulse waveform data form, it is concluded that the encoder of the bit error rate.
3. Dynamic response test: automatic starting from the static analysis of encoder, through, low speed, acceleration, uniform speed and slowdown stopped several process of pulse waveform data form, it is concluded that the encoder error rate and peak voltage parameters.
4. The service life of the test: automatic recording drive speed and total number of turns, number of pulse encoder with the acquisition by the contrast, it is concluded that the encoder of the bit error rate, and gives the encoder slewing ring number and running time (life).
II. Main technical features
1. It is applicable to the encoder with different size diameter and different interface type, which can realize the various interface types of the collector open circuit, long line drive, push-pull output and gray code encoder.
2. The two - dimensional manual table and lifting platform are used for the installation and adjustment of the encoder.
3. High speed acquisition card acquisition data and large transmission ratio reducer, phase difference measurement is accurate.
4. Emergency power failure device can ensure the safety of staff.
5. Adopt industrial computer to conduct performance test of encoder, high degree of automation, and improve work efficiency.
III. Main technical parameters
1. Equipment size: long * wide * height 1250mm*500mm* 1100mm.
2. Power supply: voltage AC220V/ 50Hz, power: 2kW.
3. Application environment: indoor.
4. The environment temperature and humidity: 0 ℃ to 50 ℃, 80% or less condensation.
5. Output voltage: dc0-60v / 0-2a.
6. Pulse phase Angle accuracy: + / - 0.1 °.
7. Maximum driving speed: 3000rpm.
8. Frequency of collection: 600kHz.
9. Two dimensional sliding table travel: horizontal: 150mm, longitudinal: 210mm.
10. Lifting platform stroke: 60mm.
11. Cartridge mounting dimensions: clip axis: 5-15mm, supporting hole: 30-60mm.